My key fob quit working after i had a heater core replaced. I think that I need to reprogram the key fob and need the code
Here are the program instructions
1. Close the vehicle doors.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
4. Press and hold the driver side door lock switch in the UNLOCK position.
5. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
6. Insert the ignition key into the ignition lock cylinder and remove the key. (Do not turn the ignition key in the lock cylinder.)
7. Insert the ignition key into the ignition lock cylinder. (Do not turn the ignition key in the lock cylinder.) Leave the ignition key in the ignition lock cylinder.
8. Release the door lock switch. The vehicle will sound three beeps in order to verify the Program Mode has been activated.
9. Press the LOCK and UNLOCK buttons together on the keyless entry transmitter and hold until the vehicle beeps twice to verify that the transmitter has been successfully programmed (this take approximately 15 seconds).
10. Perform the previous step to program up to four transmitters (including your old ones).
11. Remove the ignition key in order to exit the Program Mode
Hi i hav bought a citrion picasso key fob second hand how do i program it to my car cud any 1 help please thanks
Hi i just got a key fob for my peugeot 206 is it possible to have two fobs working on one car? thanks for your help
katrina
I have a Mazda 6 fob that i ant to marry to my car , i know its put the key in and turn 3 times(egn) then open close door 3 times, then 2 times and then 1 and the code should marry?? can you advise any other way or instructions.. Liam
9,863 views
Usually answered in minutes!
1999 Chevrolet Z71
I have a vauxhall Zafira and the remote key fob wont work,even replaced battery.Red light flickers for about a second
I bought key cylinder but need reprogramming code
How to replace & reprogram 2007 bmw x5 key fob
Ive tried reprogramming my new key fob, I put a new battery in it, I can tell that my truck is in the programming mode but when im holding the buttons down on the key fob it doesnt do anything.
×