Questions & Answers for: duplex error - Page 2

Question about Lanier Office Equipment & Supplies

1 Answer

duplex error Hello I have a problem with our copier LD145 were trying to print duplex but it tells me reset duplex unit recovery error The duplex is on the right hand side of the copier (external unit

Ad

error when the unit starts up. A red light comes on the printer button. When I push the printer button the message window says: Duplex is not set correctly. Set duplex correctly. I tried power off the

Ad

HI ayyasamyr: This your problem. 13.10 PAPER JAM The event log message for a paper-delay jam in the duplexer is 13.10. 1. Check the duplexer and the rear area of the printer for obstructions or damage

error - Duplex Unit fan obstructed D014/D015 SC 534 Duplex unit fan error - Fan harness disconnected or damaged D014/D015 SC 534 Duplex unit fan error - Fuser unit connector has paper obstruction D014

...clears this but will not print duplex? When I attended there was a message on the LCD - 49.2F05 Service Error? The error you have seems to be a memory error. Try some of the suggestions listed ...

Question about LaserJet 9500n Printer

1 Answer

error code 57.70 on HP 9500 color printer This is a duplexer fan error code but our machine does not have a duplexer fan installed. What could cause this problem with no duplexer fan? The machine ...

..."close front cover or duplexer cover". We have tried everything and the copier is still coming up with this error THE DUPLEX COVER SENSOR NEED TO BE CLEAN OR THE THE STUD ON THE DUPLEX COVER IS ...

Question about estudio 255 Copier

1 Answer

error code531 SC531: Fusing/duplex motor lock -Definition- [C] A fusing/duplex motor lock signal is detected for more than 2s during rotation. - Possible causes - • Fusing/duplex motor defective • Too

Question about LaserJet 4700 Printer

1 Answer

...Duplex is here: But 59.30 error (Fuser motor startup error/Black or N/A) Follow next instructions: Fuser motor error 1. Reconnect the connectors J4605 for the fuser motor and J1024 on the DC ...

error DM-00762 (Duplex Jam) Open the duplex module cover at the back of the printer (1). Release any cards stuck in the module (2). Make sure that the duplex mechanism can move freely in the direction

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42221 Answers

Brad Brown

Level 3 Expert

19190 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...