Fitnex E70 Elliptical Cross Trainer - Page 5 - Answered Questions & Fixed issues
I need plans for making a longboard rack
I do not think this will help, but it might give you some ideas:
http://www.protecboardracks.com/products.aspx
Another design, that you would have to modify for your purpose but a very good idea:
http://www.woodcentral.com/articles/shop/articles_794.shtml
again use this principle and do your own drawings:
http://www.woodstore.net/lumstorrac.html
7/6/2021 9:58:09 PM •
Cycling
•
Answered
on Jul 06, 2021
•
733 views
I JUST BOUGHT A SUNRACE
I can't find a manual, but the install is pretty basic. You need to bolt it to the frame, then remove one of the sprockets on the derailleur to get the chain through, then replace. Attach the cable through the locking nut, using the lowest gear first, then run it to the highest gear to make sure it runs through them all. There are some set screws to set so that the derailleur doesn't go past the upper/lower gears. It's all a matter of adjustment from there.
Hope this is of help
Joe
6/6/2020 8:02:15 AM •
Cycling
•
Answered
on Jun 06, 2020
•
1,379 views
How to adjust gears
you have to put the pad in it's 1st possiton then tighten the screws.
2/19/2020 2:51:14 PM •
Cycling
•
Answered
on Feb 19, 2020
•
187 views
Freemotion 350r
Actually there is nothing that you can fell like 0
1/2/2020 7:42:50 AM •
Cycling
•
Answered
on Jan 02, 2020
•
516 views
Where do I find a replacement tricycle seat for a 10" trike?
If you have a local cycle shop I suggest you give them a chance because with the state of online sales, if you don't use local businesses they will be lost.
Failing that both ebay and Amazon offer a great many cycle parts...
10/14/2019 1:52:38 AM •
Cycling
•
Answered
on Oct 14, 2019
•
260 views
Where and when can I donate bikes to be given away
I have taken bikes to Thrift Shops (Value Village, etc.), and to recycling depots when they have provisions to donate them to various charities. In my area, migrant farm workers often get them. I think this info depends on your geographic area.
10/7/2019 2:54:14 AM •
Cycling
•
Answered
on Oct 07, 2019
•
398 views
Rear deraileur won't shift to lower (more speed/revolution) cogs.
First, some terminology - the small cogs in the back are the higher gears. They will take you farther per pedal revolution, but not necessarily faster, as it's hard to pedal the high gears as fast.
As far as your problem there are multiple causes. The most common is friction in the shift cable. The rear derailleur shifts to the small cogs with spring pressure when you move the shift lever. It won't move well if the cable is binding. The second commone cause is the derailleur being bent inward from the bike falling on the right side. That will also cause the derailleur to move too far when shifting to the large cog in the rear - a very expensive problem if it goes into the spokes. The least common problem is misadjustment. ALL of the fixes must be done properly. The best option if available is to get help at a bike co-op or from a knowledgable friend. Otherwise take it to a shop for diagnosis and repair.
9/18/2019 11:48:19 AM •
Cycling
•
Answered
on Sep 18, 2019
•
266 views
I have a DBS bicycle and the rear wheel hub is
You might need to have your wheel replaced. If you take it to a shop they can use your old gears and tire. This well help cut the price. What is the nature of the problem?
9/13/2019 12:09:25 PM •
Cycling
•
Answered
on Sep 13, 2019
•
600 views
Not finding what you are looking for?
