OKIFAX 5980 Plain Paper LED Fax - Page 9 - Answered Questions & Fixed issues
System file full keeps showing
Go to control panel, double click printer, double click your printer and all the jobs in queue will show up. Delete some of them
10/23/2008 8:11:12 PM •
OKI Office...
•
Answered
on Oct 23, 2008
•
84 views
Oki C5900N printer: got zapped
Hi grf, try updating your printer drivers:
Create a new folder on your desktop and name it newhpdrivers(substitute your manufacturer in new name). Un-intall printer and printer software completely. Go to manufacturers website and navigate to their drivers/downloads or support menu. Select your model, choose the relevant software and download to the new folder you created on your desktop(watch for the light yellow bar at the top of window viewing pane, click on this and choose – download file - . Power down your computer. Reconnect the printer to the computer and turn printer on. Power on pc. Windows will detect new hardware and ask if you have the manufacturers install cd or a location to check for install files. Direct the wizard to your new software, follow the rest of the setup instructions and your done.
anaanymous
Rate Me Please! Hate it? Rate it…Like it, try it!
Thank you for submitting your question to FixYa.com
Would you please take a moment and show your appreciation by rating my performance.
All ratings and comments are welcome. Thank you - anaanymous
10/21/2008 11:02:10 PM •
OKI Office...
•
Answered
on Oct 21, 2008
•
129 views
OKIDATA C9500 WITH error 002
Error 002 is an cpu exception fault caused by a defective controllerboard (CU board)
When replacing this board remember to replace the eeprom on the controller from the old board to the new one.
10/9/2008 8:57:33 AM •
OKI Office...
•
Answered
on Oct 09, 2008
•
386 views
Oki 5521 alarm light flashing.
You have a fatal error, what kind of error is specified by led combination of PRINT QUALITY and CHARACTER PITCH.
10/13/2008 2:14:16 PM •
OKI Office...
•
Answered
on Oct 13, 2008
•
1,115 views
PC CANNOT FIND PRINTER PORT
Go to Start >> Control Panel >> Printers
Select your printer, right click and go to >> Properties then go to >> Ports
Check which port is using your printer and correct (LPT1 or USB Virtual Port)
11/24/2010 6:59:15 PM •
OKI Office...
•
Answered
on Nov 24, 2010
•
1,602 views
The check mark on my
right clik other printer then clik on set as default printer
thats all
9/30/2008 1:57:12 AM •
OKI Office...
•
Answered
on Sep 30, 2008
•
84 views
Wrinkled paper
Hello may i ask if you received my messages?
9/25/2008 1:15:37 AM •
OKI Office...
•
Answered
on Sep 25, 2008
•
177 views
OKI C5800 ERROR MESSAGE- DRUM
hi!!!
try to check the drum first!!!
clean it with the dry tissue?
there a lifespan of the drum
i have the same problem with that.
my drum capacity is only 30,000 copies
so then i replaced it! and works fine now
so try to replaced the drum it might on it capacity
or clean it
try to email me ronaldsuboc@gmail.com
9/19/2008 12:10:49 AM •
OKI Office...
•
Answered
on Sep 19, 2008
•
1,002 views
I just replaced the toner
1 of two things. You have a bad heat roll in the fuser. They will wear out the teflon and cause that problem. That is the very hot area in the exit area of the machine.
Also there s a machine made by Sharp but marketed by 3 or 4 vendors, Sharp, Toshiba, Xerox and some others, where the high voltage power supply will cause that problem.
Most likely the fuser needs replaced. That is the most likely problem. I mention the high voltage power supply because it is a possibility.
8/30/2008 1:11:11 PM •
OKI Office...
•
Answered
on Aug 30, 2008
•
127 views
Dont have a disk to
go to this link to get drivers for your b4350, i think you might need to register first to see the actual drivers... but there is a free registration option there, just select that, these drivers are free i think...
http://list.driverguide.com/matches.php?h=b3796f93cb00198e1b58fff57aeeed56&ids[0]=198509&ids[1]=198507&ids[2]=198504&ids[3]=198503&ids[4]=198510&ids[5]=198506&ids[6]=198501&ids[7]=198499&cid=750&model=B4350
8/22/2008 12:36:42 AM •
OKI Office...
•
Answered
on Aug 22, 2008
•
62 views
Hi
oki c5600. printing A4 size
that means that your ink and the label materials are not compatible. you may need to use less ink, or a more porous label facing.
8/20/2008 2:07:23 PM •
OKI Office...
•
Answered
on Aug 20, 2008
•
104 views
When to change the ink
its a reference point for you to see how much is left, it should still print but will get lighter as the toner goes down.
8/19/2008 7:02:34 PM •
OKI Office...
•
Answered
on Aug 19, 2008
•
89 views
Not finding what you are looking for?
