20 Most Recent
Boss Audio BV10.4BA Flip-down Overhead Monitor with Built-in DVD Player, 10.4 TFT-LCD Active Matrix Display, Resolution 1152 x 234 pixels, Brightness 500 NITS, DVD Playback as well as DVD-R, CD, MP3, VCD and MPEG-4 Compatible, Anti-skip mechanism, Last po - Page 9 Questions & Answers
Why does my boss 1600 watt diablo amp cut off at high volumes
Chances are your speakers are running at to low of impedance. Check if your running aftermarket. speakers, if so they are probably wired in parralle. Change the wiring to "series"increasingly your impedance from 2ohms to 8, that should solve your issue.
What is the deal with the green parking brake wire on the boss 7320?
By U.S.federal law you can't drive and have a movie playing at the same time, that wire when connected will only let you watch the movies while the vehicle is in park. To go around this all you have to do is ground the wire, I always just ground them the the radio itself on the backside around a bolt on the radio heat sink, and there you go you now can drive and watch Movies.
Boss AR4000D 4000W MONO Car Amplifier owners manual
here you go man.
sorry you bought this amp. I hope it does what you want it to, I am pretty sure it will never do what they say it will but It may do what you want it to for the price.
here is the manual you asked for. http://bossaudio.com/manual/ARMOR_D_EN_UM.PDF
Hi i just installed a boss am/fm receiver in my boat it works for about five minutes then start to turn on and off, on and off. any suggestion.
I'm not experienced with the boss, BUT..... the symptom suggests that you have wired the receiver into a circuit which:
1. has too low a curent rating [not enough amps] for the receiver device, AND....
2. is protected with a SELF RESETTING circuit breaker.
IF that is the situation, then the OVERLOAD caused by the too heavy receiver is causing the circuit breaker to "TRIP" and cut off the electric power in the circuit.
Self resetting breakers work by having a bi-metallic strip inside which causes the strip, when overheated by an overload, and in bending, OPEN the circuit, cutting off the power. This reduces the risk of an electrical fire!!!!!
When the bi-metallic strip cools enough, it RE-CLOSES the circuit, turning the power back on UNTIL the overload causes to to trip again.
This is a safety/fire protection issue, AND you need to take your vehicle to a QUALIFIED [CERTIFIED preferably] vehicle sound shop where a qualified TECHNICIAN can troubleshoot the issue, and probably will either find a more powerful supply circuit, OR....
ADD a new, adequately sized wiring circuit to support your sound equipment.
What this issue sounds like is that YOU have installed a sound system/device which needs MORE POWER than your existing circuit can safely provide!!!!!!!!
Be SAFE, get PROFESSIONAL HELP!!!!
Bv 9962
If you wish to get some details; check the site linked here. Viewing it in "
Mosaic" or "
Magazine" will make surf easy. Pull up older posts. Surf the site with patience.
Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Not finding what you are looking for?
