Top 20
Krylon SP117 VHT High Heat Spray Paint, Flat Aluminum Questions & Answers
: No Video File Found. It was working yesterday because I played back a video with no issue.
Here are some steps you can take to address the problem:
Check Power and Connections:
Ensure that all cameras and the NVR (Network Video Recorder) base station are properly powered and connected.
Verify that the power cables are securely plugged in and that there are no loose connections.
Reboot the System:
You mentioned that you've already unplugged the system to reboot it. Let's try this step again:
Disconnect the power supply from the NVR and all cameras.
Wait for a few minutes.
Reconnect the power supply to the NVR and cameras.
Power on the system and check if the issue persists.
Check Video Playback Settings:
Access the NVR settings through the user interface (usually via a connected monitor or TV).
Verify that the playback settings are correctly configured.
If you played back a video successfully before, ensure that the correct date and time range are selected for playback.
Inspect Hard Drive Space:
The Cobra system typically comes with a built-in hard drive for video storage.
Check if the hard drive has sufficient space to store new recordings.
If the hard drive is full, consider deleting older footage or expanding storage capacity.
Review the User Manual:
Refer to the Cobra 63842 Owner's Manual & Safety Instructions for detailed guidance on troubleshooting and system setup.
Look for specific troubleshooting steps related to video playback issues.
Contact Customer Support:
If the problem persists, consider reaching out to Harbor Freight's customer support.
Not finding what you are looking for?
