Indesit Error Messages and Error Codes
Indesit Dishwashers
- F10 - Fill or empty time out. Check that the hoses are not kinked, that the taps are on or whether the drain pump or hose is blocked.
- F11 - Heater timed out. The heater has not reached the required level. Book a service engineer.
- F20 - Temperature under range. Book a service engineer. .
- F21 - Temperature over range. Book a service engineer.
Fault codes for Indesit LCD Dishwasher Models
- A01 - Float switch operated - Book a service engineer.
- A02 - Open/Short circuit heater relay - Book a service engineer.
- A03 - Short circuit on thermistor - Book a service engineer.
- A04 - Unable to reach or sense temperature within 70 minutes - Book service engineer.
- A05 - Pressure switch has not been reset - Book a service engineer.
- A07 - Open/Short circuit wash motor triac - Book a service engineer.
- A08 - Open/Short circuit auxiliary wash motor triac - Book a service engineer.
- A09 - Open/Short circuit with main wash traic - Book a service engineer.
- A10 - Open/Short circuit fill valve traic - Book a service engineer.
- A11 - Half load valve traic or alternating motor action - Book a service engineer.
- A12 - Open circuit heater rely - Book a service engineer.
- A13 - Open/Short circuit dispenser traic - Book a service engineer.
- A14 - Drain hose too low causing syphoning. Check drain hose and re-adjust.
- H20 - Check tap and pressure of incoming water.
_uacct = "UA-1207243-4";urchinTracker();
×