Use Windows Media Player to transfer songs.
SOURCE: computer not recognizing mp3 sansa clip
Disconnect your Sansa player from computer, turn it off, hold in the volume + button and reconnect to the computer. Continue holding the volume + button until the "Found New Hardware" Wizard pops up - XP will load the needed drivers.
SOURCE: sansa clip problems with driver
Comment by vickisanchez, posted on Mar 19, 2008
IT FINALLY WORKS !!!!
Sandisk Tech support had me do the following:
- Turn it OFF
- Put it in the HOLD position
- HOLD the center button IN while plugging into USB port, continue to hold for 5 to 7 sec even after plugged in.
At this point MY COMPUTER recognized it. And it worked.
He also had me to:
- go to WWW.MICROSOFT.COM
- In the upper right hand search bar, type in MTP PORTING KIT
I did this and downloaded the first one. Now my Sansa Clip work perfect. I wish I would have talked to him last week before I returned the last one, for the same reasons.
If this does not help call the 1-800 # , opt #4, and ask for GUY (yes that is really his name) out of 5 or so calls to Tech Support he is the only one who knew what he was doing, and how to actually HELP.
GOOD LUCK
SOURCE: Sansa clip; Does not appear on icons
unplug Sansa MP3 player from your PC, go to menu ->settings, scroll down to USB-Mode, change mode from MTP to MSC, re-connect, yout PC will connect, detect new usb devive, disk drive.... and your sansa icon will be displayed at computer folder.
Good Luck
SOURCE: sansa clip problems with driver
okay
there u go
rate me fix ya
choose the model of sansa thta u got
http://www.sandisk.com/sansa/#/support-0/
116 views
Usually answered in minutes!
×