As previously suggested, try cleaning out the drain system. See my solution at http://www.fixya.com/support/t114322-kenmore_elite_h3t_washer
-Todd
I was having a similair problem, in the high spin cycle. Water wqs not completely draining. medium and low spin were ok. I followed the advice posted by Catriver, and it seems to have fixed the problem. Thanks for posting. This is what the 'net was inteded for!
Dskbob, the first thing to do is remove the lower panel. Right in front you will see the pump filter. Get some towels and a bucket and unscrew the filter cap and pull the filter out. See if you have a bunch of lint and stuff in there. If you do, clear it out and give the washer another shot. See if this corrects your problem...Catriver..post back
384 views
Usually answered in minutes!
My Maytag washer is not spinning out all the water, on the final cycle. It seems to happen mainly when there is a heavy load such as a blanket or bedspread. The washer nor the load is not out of balance.Thank You in advance for any help with this matter.
have a whirlpool washer model #LSQ9564MQ0. Will not spin clthes dry unless I put back on high spin and loosen basket, close door until I hear it spinning. I have to repeat 2 or 3 times. Whats the problem?
i have a kenmoore elite He3t it seems to be spinning very slow and making a low sounding moan. any help would be greatly appreciated.
Thanks
Dave
×