If you remove the 2 screws on the right and left bottom plate and open the door and youll see 2 screws that panel will come off turn the oven on and you should see 2 burners on both sides and they should ignite.if they do and go right out you could have 2 problems.when the burners light they hit a probe called a flame sense.this probe plugs into a heat board and if the board doesnt sense the flame you will get a red no ignition light.clean the probes that sit right on the burners with sandpaper and see what happens,if that doesnt work if the unit has pilots clean the pilot orfice and if that doesnt work the heat board may be bad.how old is the unit?
693 views
Usually answered in minutes!
we have the same proplem with are vulcan gas convection oven the ignitor sparks but the flame does not light i cleaned the flame detector probe and also changed burners and probes from top to bottom oven to see if probe was bad and top oven does the same thing it still well not light it only sparks but will not light please help thanks its a vulcan gas convection oven model VC4GD-its a stackable unit
×