Its a Roper RTW4340sqo Don't have a manual at this moment. Just need to take the wall shell of the machine to get the Screw that is logded out.
Ok llangis,,ready always unplug first,,good,,,now look at the front console you see a screw in each corner,,phillps head,,remove them now flip the console back and just let it hang backward,,,now your looking at that white connector thats your lid switch..disconnect it ,it has two gray wires and a green on one side,,and the other side has brown wire with whit tracer ...now at booth ends of the cabinet you see a brass clip take screw driver and pry up..now just pull cabnit only, to you..now your in,,,reverse to put together,,,onthejob
78 views
Usually answered in minutes!
×