Is the Ice Full metal bail (connected to switch) hanging down (Icemaker ON), straight out (off) or missing? If straight out, push down, if Missing, find and reattach or manually flip the switch that the bail connected to (near light), close door and see if it kicks on.
Another possibility is the entire feed, valve and fill piping froze and is packed with ice. Use caution here...
Fill a large bowl that will fit in the cubetray with boiling water and carefully insert it into its location, Flip the switch up (straight out) close the door, set kitchen timer for 30 min and check it then by removing bowl , flipping bail down and closing door. It will take 30 sec or so to start filling.
If all that gets you no joy, replace the fill valve solenoid
119 views
Usually answered in minutes!
what solutions?
my ice maker simply wont work.
×