Code error 3607

SOURCE: Kodak EasyShare 5300 Printer error message

Ten Step Process to Fix the "Print Head" Error Message on the Kodak 5300 Printer.

1. Clear a good spot it your back yard that is free of shrups and flowers.

2. Get the following tools: Flat head screwdriver, shovel, sledgehammer.

3. Dig 24" x 24" hole in your back yard and rope off the excavation area for safety.

4. Whaaaaack the heck out of the Kodak 5300 with the sledgehammmer until such time that it is not a recognizeable piece of electronic equipment.

5. Stab it with the flat head screwdriver, just in case it has the Terminator syndrome (comes back to life).

6. Throw the piece of garbage in the recently excavated hole in your back yard.

7. Cover up that useless piece of garbage and forget you ever owned it.

8. Get in your car and go to the nearest electronic store and ask to speak to the manager.

9. Ask if they sell the Kodak 5300 printer. If so, whack him with the shovel. You don't want to seriously injure him so don't even consider the sledgehammer of the screwdriver. After all, its not his fault that his company carries such garbarge. But the whack is just to burn off some steam from your frustrations.

10. Purchase any other printer but a Kodak and live happily ever after.

SOURCE: kodak all in one printer instalation error codes

Unfortunately, the only way to possible fix this error is to get the printhead out and reseat it. You can do that by removing the ink cartridges. Right above where the black ink cartridge was, at the top left hand corner of the printhead, if you push up towards the ceiling there should be a button that releases the printhead. You should now be able to tilt the printhead forward and pull it out of the printer. Reseat the printhead by putting it back in the printer and pushing straight back on the back wall of the printhead. It should snap into place. Replace the ink cartridges and close the printer. If the error clears, download the newest firmware from kodak.com so this never happens again.

If these steps do not clear the error however, call Kodak AiO tech support at 1800 421 6699 to get a new printhead.

SOURCE: Kodak 5300 Printhead problems

Contact Kodak! I received a new printhead and that solved the problem. Great customer service!

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

Clarification: Remove tanks(cartridges)first. You see the bullseye target with a finger pointing to it.
Above the bullseye sticker, there's a rectangular button. Press it in until printhead dislodges.

SOURCE: How do you remove the printhead of a Kodak EasyShare 5300 printer?

I have tried what is suggested , I am not getting anywhere with this. I wasn't able to move my finger to the left of anything. What am I doing wrong!

TY
LindaPNY