Error code sc392

SOURCE: how do I fill developer and initialize

You must replace the whole Photoconductor unit, Type 1027.
This unit includes drum and also developer.
Then switch on the machine and it is initialized automatically.

Good luck and please rate me, thanks.

SOURCE: RICOH AFICIO 2027 SC392 CODE,IM AN ENGINEER AND

• Someone forgot to remove the toner
seal of the PCU
• ID sensor defective
• TD sensor abnormal
• Drum does not turn
• Development roller does not turn
• Poor connection of the PCU drum unit
Clean connector of TD sensor and
Try Change the development unit, adjust TD sensor.
Clean and you verify the connector of PCU.
Good luck...