Error code 2

Douglas Henry

• 175 Answers
• Posted on Jun 18, 2007

SOURCE: error codes

Usally this is a bad control board or in some cases, a bad display board. they are fairly easy to replace and should be covered under a 5 year parts warranty (no labor). if its older than 5 years i would advise getting rid of it before putting any real money into it as Eurotechs are affectionatly know as Eurotrash in the industry and it WILL give you more problems. If you need a short dishwasher to fit under some shorter than standard counters, go with an ASKO. They are made by the same parent company, but are 50 times better. Good luck!

SOURCE: hoover dishwasher error codes

Hi we have a Hoover DT999 and according to the manual for that machine error E1 is water inlet tap turned off

SOURCE: AEG 50760 Dishwasher shows Error Code 30

there is water in the base of the macine. lean it over to the side to get all of the water out then try again.

SOURCE: SE error code on Samsung dishwasher

Here are the error codes from Samsung's website:

Error Codes If your dishwasher is displaying an error code, please refer to your users manual for an explanation. If you don't have your users manual on hand, you can download it from Samsung's Download Center. To go to the Download Center and download the users manual for your dish washer, click here.
Common error codes caused by installation errors are:

• 5E which indicates a kinked or bent drain hose
• 4E which indicates that the water supply valve is closed or not fully open
• LE which indicates a leak.

SOURCE: Error code E:24

bosch logixx error code: e24?