Hi, i forgot my security code, how would i go about reseting it? please help..
Yup Sony Erricson codes are easy to remove.
Here is the solution, which i'v tested many times.
i used XS++ with DCU60 cable (i.e; USB cable which comes in the box),
Download 3.1 version here
use XS++ 3.1 and Another version
1) Switch off your phone,
2) run XS++.exe
3) In XS++, click Connect.
4) old C on your phone and then insert the USB cable.
5) u can get some information about your phone when it's connected,
6) click or tick GDFS at the bottom.
7) Then click Phone Lock, and reset it to 0000.
8.) click Settings at the bottom, then Disconnect.
9) unplug the USB cable, remove then reinsert the battery
10) switch on your phone
The code will be set to 0000
Enter it, and chage accordingly.
Kinda, You are done.
If i was helpful, kindly do Rate!
Sir, you can reset its setting by: menu > settings > master reset > reset al. Or you can just plug the phone to a pc and then use a pc suite to update its firmware and by doing so, the factory settings will be restored.
219 views
Usually answered in minutes!
×