Blinking dots the dots displayed between the hours and minutes keep blinking on and off. I tried pushing the snz button when i was finished setting the clock but the are still blinking. help. mel

SOURCE: Accuwave DS Clock

The radio may not be able to get a strong enough or clear enough signal to process (night is best away from TV, computers and radios).  To regain "control" of the clock, take the battery out, wait 30 seconds and then reinstall it.  This will reset the clock.  You can then manually set the clock. 
Press SET for a few seconds until the hour starts flashing in the display.  Then press the ADJUST button to set the hour.  Press SET to move to the different functions (Hour -> Minutes -> Seconds-> Month -> Date -> Year) each time using the ADJUST button to correct the setting.  Finally press MODE to exit the setting mode.  
If the time zone is incorrect for your area (default is PST), press MODE to enter the Alarm Time Mode; then press SET to flip through the time zones; then press MODE again to exit.
The little "reset" is for use if the LCD display doesn't come on when the battery is changed. It doesn't affect any of the clock settings per se.

SOURCE: cannot properly reset skyscan atomic clock

press set button repeatedly -you get timezone mode and change your wished time zone and select your zone then press set button to normal mode and adjust the current time.
thanking you.

SOURCE: Manual Information/Owner Guide

In order to toggle display of Temperature, Seconds, Day of Week, and Month, hold + and press Set once. Release and repeat to move through the various display configurations.

SOURCE: trying to set the clock on my TEAC CD-X60i - when

You have to set the clock with the unit in standby mode.

SOURCE: 2004 nissan titan rockford fosgate 6-cd player

What is the model number of your unit