Click this link and you should get some info
I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d
Too many consecutive jams in the fuser.
Panasonic has a fuser modification for the 80 and 60 series SFDM's that allow the upper seperators to swing away from the heat roller. They only advertise it for the 45 and 60. I have used it on 35's without a problem. Just don't replace the black guide on a 35.
After addressing fuser mechanical problem, you'll have to do an F9-6 fuser reset.
×
931 views
Usually answered in minutes!
×