My D30 is flashing Error code22, and I have already changed to a different CF card and fresh battery; still flashing. Any suggestions? It says to consult a "technician". Don't know any!
Thanks!
ERR 22: CF DRIVER
DESCRIPTION: This error occurs when image data cannot be written to the
CF card. This error can occur when the CF card is not fully seated in
the camera or if the D30 does not detect a card-ready signal within a
specified time limit or when the CF card is not usable because it has
been corrupted or physically damaged. It can also occur when the camera's
battery level is insufficient to completely write the file to the CF card.
REMEDIAL MEASURE: Use the DC Coupler or recharge the battery first. If
the error continues to occur with sufficient power available to the camera,
check that the CF card is properly inserted. If that's not the problem,
then try replacing the CF card. If that does not solve the problem, have
the EOS D30 and one of the CF cards that is causing the problem examined
by a qualified service technician.
Got this from here: Digital Outback Photo
229 views
Usually answered in minutes!
Thanks...but I had already tried replacing the CF card and battery. Still have the problem. Don't know any qualified service technicians who can take this to the next level.
×