I have a SV 2000 vcr/dvd combo and a jensen universal remote I am pretty sure it a jer321 or 323 series could you please find me the codes for the SV 2000 vcr/dvd combo or how can I do it manually..
thank you
1.Manually turn on the component you want the remote to control.
2.Press
and hold the component key (TV, VCR, Etc..) you wish to program. The
illuminated ON-OFF key turns and remains on.
3.While holding the
component key down, press and hold the ON-OFF key. The illuminated
ON-OFF key turns off.
4.After holding down both keys for three
seconds, the illuminated ON-OFF key turns back on.
5.Release both
keys. The illuminated ON-OFF key remains on.
6.Press and release the
ON-OFF key repeatedly until your component turns off. Wait four seconds
between each keypress. Each time you press the ON-OFF key, the
illuminated ON-OFF key blinks and the next code in the list is sent.
This process continues until all of the codes in the Code lists have
been searched. If your component turns off, you have found the correct
code.
7.Once you have found the correct code, you must save the new
code by pressing and releasing the STOP key. The illuminated ON-OFF key
turns off. You must press the STOP key to save the code or the correct
code will not be stored.
hope this helped
Robb
please leave feedback
883 views
Usually answered in minutes!
×