A problem has been detected. i boot it from cd and after the windows setup it displays" a problem has been detected and windows has been shutdown to prevent damage to your computer the problem seems to be caused by the following file: partmgr.sys page-fault-in-nonpaged-area if this is the first time youve seen this stop error screen restart your computer. if this screen appears again follow these steps! check to make sure any new hardware or software is properly installed if this is a new installation ask your software manufacturer if problems continue disable or remove any newly installed hardware or software , disable bios memory options such as caching or shadowing your computer press F8 to select advanced startup option s, and then select safe mode. technical information: *** stop :0x00000050coxf7aed4ab,ox00000000,0cf7aed4ab,0x00000000 *** partmgr.sys address 47aed4ab based at 47aeb000 datestamp 000000 00" how to fix it?? please help

In you're case, find the hard disk drive manufacture name which is printed on a sticker on one side of the drive. Lets say you're hard disk drive is either a Seagate drive or a Maxtor drive. Download SeaTools for DOS from the link provided; http://www.seagate.com/ww/v/index.jsp?lo...

Once downloaded you'll be able to create a bootable CD or a bootable floppy disk which you'll be able to run their software in a Dos like mode. See the tutorial on the site. For Weatern Digital drives go here; http://support.wdc.com/product/download.... For Samsung drives go here use, (ES-Tool); http://www.samsung.com/us/business/compo...

Each program will test you're hard disk drive for problems and most of the time it can repair problems. All drive manufactures have software to test and setup both IDE and SATA drives. All allow you to check, setup, repair and format these drives. Keep in mind all of these will erase any and all data currently on the hard disk drive. Once completed you shouldn't have a problem installing an operating system. If the software finds a problem that can not be repaired and if the drive is still under warranty, themanufacture will replace you're drive.



Hope you fine this helpful!

Mike In you're case, find the hard disk drive manufacture name which is printed on a sticker on one side of the drive. Lets say you're hard disk drive is either a Seagate drive or a Maxtor drive. Download SeaTools for DOS from the link provided; http://www.seagate.com/ww/v/index.jsp?locale=en-US&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
Once downloaded you'll be able to create a bootable CD or a bootable floppy disk which you'll be able to run their software in a Dos like mode. See the tutorial on the site. For Weatern Digital drives go here; http://support.wdc.com/product/download.asp?groupid=805 For Samsung drives go here use, (ES-Tool); http://www.samsung.com/us/business/components/storage/hdd/software.html
Each program will test you're hard disk drive for problems and most of the time it can repair problems. All drive manufactures have software to test and setup both IDE and SATA drives. All allow you to check, setup, repair and format these drives. Keep in mind all of these will erase any and all data currently on the hard disk drive. Once completed you shouldn't have a problem installing an operating system. If the software finds a problem that can not be repaired and if the drive is still under warranty, themanufacture will replace you're drive.

Hope you fine this helpful!
Mike