LF error indicates Long Fill
Remove the hose coming from the wall and clean the screen on the machine side.
If it is clean - and you have good flow from the wall - then you either have a bad water valve or the
control is sending power to the secondary diverter valve but not the
primary hot/cold valve or vise verse.
If cleaning screens doesn't work then most likely needs inlet valve. i
have seen one of these with LF code caused by the machine control
howeve.
If you have the flood proof hoses - change them for regular ones... they have some sort of built in safety mechanism where if they "think" the flow is too much they will shut themselves off.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
I am getting the error LF after my washer runs about 7 or so minutes. any solutions
423 views
Usually answered in minutes!
×