Need the code for a Curtis Mathis tv for a Brightstar Remote BR100Z

SOURCE: need volume codes for a brightstar br100z remote for LG TV?

iunno...

SOURCE: i need the codes to

The Sanyo codes appear to be 620, 801, 931 . Turn on the TV, press and hold Set-up until the light comes on and enter the three digit code. Check if the TV responds (volume, channel). If not try the next code.

To search all codes: turn on the TV, press and hold the Set-up button. Then press Channel + slowly but repeatedly until the channel changes. Press Enter (if you overshoot, press Channel - to before pressing enter.) To record the code, turn on the TV, press and hold Set-up, then press Set-up again and type 0-9 individually until the indicator light blinks. That is digit 1, repeat the search from 0-9 for the other two digits.

If your TV was released ~6 months before the remote was programmed or is newer than the remote, then the code you need may not be in the remote's programming. In that case, you need a newer remote, one of the remotes that is programmable (USB to a computer), or a remote specific to your TV (try remotes.com and search on the TV model - leave off the brand name).

I hope this helps.

Cindy Wells

SOURCE: I need the remote codes

http://www.cleanremote.com/br100instruction.htm

Good luck! Be sure to leave feedback!

SOURCE: I have a GE Universal

There are two different lists of 3 digit remote codes for GE remotes. How old is your remote?

For a remote released before Aug 2002:
Sharp 004, 006, 012, 029, 095, 111, 112, 113, 122, 171, 173
Sylvania 004, 006, 008, 019, 062, 068, 069, 074, 075, 076, 077, 088, 116, 161,
183, 184
Curtis Mathes 000, 004, 006, 015, 105, 162, 171

For a newer remote:
CRT Televisions (only)
Sharp 004, 006, 009, 020, 063, 079, 095, 111, 112, 114, 122, 123, 124, 173, 226, 266
Sylvania 004, 008, 009, 062, 068, 069, 074, 075, 076, 077, 133, 135, 141, 161, 163, 189, 198, 227, 456
Curtis Mathes: 000, 001, 004, 006, 009, 015, 031, 049, 105, 109, 162, 171, 130, 358

LCD TV Sharp: 063

For combination units, please see the manual at the URL below.

The full code lists are here: http://www.jascoproducts.com/support/universal-remote-codes.asp .

I hope this helps.

Cindy Wells
(Note: the codes included in the remote are limited to those for TVs released 6 months or more before the remote was programmed. If your TVs are newer than the remote, you probably need a newer remote.)