The lowest section of one of the 'legs' of my Linhof tripod suddenly fell out. I retrieved the clip, rectangular black plastic piece and a flat 'silver' piece and that is all. Cannot replace the section properly- it doesn't click in place. Was sent a diagram which seems to indicate several of these metal pieces, stacked. I cannot get info as to whether this/these parts are available. Previously a 'foot' broke off and I was sent a new section- I believe this is the same section~! Thanks, Ann McGowan annmcgowan2001@yahoo.com

SOURCE: One Leg has loss it's grip.

take it apart, there is a rubber ring like a belt or rubber band, either broken or missing. you will have to find a relacement for that, may have to take apart another leg to have one to compare, course I don't honestly know where you will find that piece. too take it apart just keep spinning the lock counterclockwise until it comes off. good luck.

SOURCE: VGB3 leg lock broke

On the velbon vgb 3, the leg locks consist of a lever, one or two pieces of metal and a plastic piece. The metal and plastic pieces rest in a depression against the lever. When the lever is pulled out, pressure against the smaller leg section is released. When the lever is pushed in, pressure against the smaller leg section is exerted, locking the legs in place. On the back side of each joint, there is a phillips head screw which acts as a stop to keep the leg section from coming all the way out. When the screw is backed out, the leg section can be removed, exposing the latching mechanism. If the only problem is that the latch mechanism came apart, it can simply be reassembled. If, however, something broke and allowed the latch assemby to come apart, that will have to be dealt with as well. My guess is that the phillips screw may have become loose, and the latch came apart.

SOURCE: parts for a velbon tripod

hi there, i think you can obtain the parts directly from Hakuba USA. www.hakubausa.com they're the USA distributers for Velbon and will actually repair it... if you can't by simply replacing a part. also a phone # 1-800-423-1623 and a seperate # 800-886-2236 to order quick release plates.

SOURCE: Tripod Sunpak 7575 plastic piece inside leg

does anyone know were you can buy spareparts for a sunpak flash?

SOURCE: Broken leg clip on Manfrotto Modo 785B

Yes you can. But I saw that your Manfrotto is possible to buy for 50 Euro.
Anyway the part you need is the full leg called CODE:
R785,203B
you can see the datasheet on the spare part site of Manfrotto:
http://www.manfrotto.com/webdav/site/manfrotto/shared/manfrotto_nord/pdf/7/785B_20070503.pdf
Regards
PDG