The F33 error code indicates a pump drive system error. If the pump ohms
out correctly & the harness is secure I recommend replacing the CCU
(central control unit).
Please see the following image provided for instructions.
CLICK HERE
Remember to disconnect power to the washer before attempting access.
Thanks for using FixYa&^%%$
4,688 views
Usually answered in minutes!
I had this same exact problem. Pulled out the drain pump and found a small piece of fabric wrapped up on the impeller. Somehow the fabric made it past the filter! I pulled the fabric out with needle nose pliers, made sure the impeller was turning freely and reinstalled the pump. Works like a champ now!
×