This problem most likely is with your regulator. if you decide to replace it please make sure you get the right size replacement. Some salespeople dont know the difference there are four common sizes from class 1 to class 4. If you take the old one with you make sure you match the numbers up with a new one.
Hope this helps You
please rate me.
Adjust the screw hidden under a sticker on the adjustment knob. That will increase the flow.
1,639 views
Usually answered in minutes!
I removed the sticker on the knob and screwed on the adjustment screw. Now I got a bigger flame, but strangely enough not in the full length of the tube. The first 10-20 cm have almost no flames emerging.
Even after turning down gas at BBQ, the temperature still climbs over 400. It doesnt seem to regulate the temperature to stay at a constant temp.
The original propane tank cannot be filled anymore since it just expired. When I hook any other tank to the grill the regulator does not work properly. I only get a small flame. Have replaced the regulator and I have the same problem.
×