I have lost my disk and need to program a password, due to nieghbours using my wireless. How do I do this

Hi evan,

Basically you don't need a CD if you want to change the password or put a password on the network all you need to do is to access the Wireless Settings Page of the Router and put or change the Network Key. To access your router you need a working computer connected to the router then open a Browser then type 192.168.0.1. the Username is admin and the password is blank. Go the the Wireless Settings Page and under Wireless Security Mode you can change the Security Mode to either WEP, WPA or WPA2 then input your desired password.

Rate me if this helps so i can help others.

Thanks for using Fixya.

You don't need the disk the manual will show how to do it, you just login and configure it! To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (192.168.0.1). Enter the user name (admin) and your password. Leave the password blank by default. but there are 2 revisions yours could be any of the 3
manual ftp://ftp.dlink.com/Gateway/wbr1310/Manual/wbr1310_manual_110.zip
if this isn't yours the others are here http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310_revB http://www.dlink.com/products/?tab=3&pid=WBR-1310&rev=WBR-1310_revD