Error code: PROCESS1_INITIALIZATION_FAILED STOP: 0X0000006B, 0X00000002, 0X00000000, 0X00000000 On a 10.1 Inspiron mini by Dell

SOURCE: Dell Inspiron 5100 will not boot. Error ide

The hard disk is dead, it must be replaced and Windows reinstalled .

Testimonial: "Thanks, sad but true. It is an older laptop and was bound to need an upgrade. Thanks again."

SOURCE: loud beeps at start up dell inspiron mini

Beep codes for the Inspiron Mini are as follows:

Beep Code Possible Problem
One Possible system board failure — BIOS ROM checksum failure
Two No RAM detected
NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly.
Three Possible system board failure — Chipset error
Four RAM read/write failure
Five Real Time Clock failure
Six Video card or chip failure
Seven Processor failure
Eight Display failure

SOURCE: stop 0x000000ED (UNMOUNTABLE_BOOT_VOLUME)

Hmm seen this a few times. This is most commonly caused by your NTFS format layering being corrupted. Meaning that the partition was either not completed when u loaded the operating system or the format has been corrupted from "hard shut downs" This is turning the pc off with the power button instead of going to "start" button and doing a soft shut down. U can try retrieving the format back but u will have programs that no longer responde. Easiest way to solve the issue is reloading your operating system.

SOURCE: my dell inspiron mini 10 won't boot.There is just

My dell inspiron mini 10 won't boot.There is just a flash of white light then a flash of amber light when I press the power button. That's it, nothing else. I've removed the battery and unplugged the unit and put it back together and it still does the same thing. HELP!

SOURCE: Eee PC 1000H (EEEPC1000H-BLK066HX) PC Notebook: blue screen states process1 initialization failed ...

known as the "Blue screen of death" in some circles