What does Error Code E02 mean for a Bosch FL Washer, WFMC3200UC/01 ? Where can I get a list of all the Error Codes and what they mean?

SOURCE: Bosch Nexxt Washer Error Code E02

Check that water inlet tap is open and hose is not kinked....the error is for water inlet taking too long.... Oshie

SOURCE: E02 Code

Faulty heating element, or main eprom is faulty

SOURCE: Bosch WFMC3200UC

I'm having a hard time understanding what is happening with my Bosch. Mine is filling and then immediately emptying out. Then the door unlocks but the timer indicates 45 minutes left (or so) and the door lock light is still on. Usually the only cycle that spins now is the spin cycle, but this doesn't help me get the soap out of the clothes still in the drum.

When the machine fills but doesn't rotate, the water level seems low as well. I had a repair man out who thought it might be the door latch sensor needing replacing (honestly, my toddler was pushing that button repeatedly), but I don't think that's it.

What does work: I unplug it for a while. Then if I'm lucky and the laundry Gods are shining down on me, I can wash normally (usually I'm luckier on Permanent Press but I always used to use the Cotton side). However, once I turn the machine "off," that's it all the problems persist so I have to wash it all, one load after another.

SOURCE: I have a Frigidaire Gallery front load washer with E10 error code

When ours does that it is because of the hard water build up. We have to un-hook the hot water clean out the minerals and it stops doing it.

SOURCE: Bosch 500 washer won't finish rinse cycle. Flashing error code13

Timed out on drain cycle, basically you either have an outlet blockage or something is trapped in the pump, you can check the pump by opening the bottom right flap on the front panel,manually emptying the w/m and checking the pump filter for coins etc. Also, check the outlet isn't blocked.
Good Luck.