Ibm raid controller drivers for x series 346 server

SOURCE: defunct drive

You could rebuild the defunct drive with the raid program on your server.

i don't know your type and model of your server.

8488 or 8648 and the model 3 digits.

for this you need serveraid manager

http://www-304.ibm.com/jct01004c/systems/support/supportsite.wss/docdisplay?lndocid=SERV-RAID&brandind=5000008

please do not update your firmware or drivers at this point if applicable.

if rebuild of a defunct drive doesnt work you'll need to change the drive. remember in a raid 5 you need min. 3 drives.

SOURCE: Planar PCI device does not respond or disbale by user

this is not an error message, see: http://www-304.ibm.com/systems/support/supportsite.wss/docdisplay?brandind=5000008&lndocid=MIGR-41551

SOURCE: Its not booting and the Leds VRM and NMI are with amber color

VRM and NMI lights lit usually indicate an issue with CPU #2's VRM which can be replaced. Also check 5 lights on back middle of system. If VRM light is lit here remove CPU 2 and VRM and reboot system. If system boots, this was the issue...