FL error - Flood condition
"FL" flashes if any overfill condition occurs. This condition occurs when
excessive water in the tub causes the overfill switch to trip. The control
must realize that the trip was due to an overfill condition instead of a
suds lock condition in order for "FL" to be displayed.
With an overfill condition, the beeper repeats a warning every 10 seconds
with no time out. The pump is cycled in drain mode for 30 seconds on, 30
seconds off until the overfill switch resets or power is discontinued to
the unit. Press STOP/CANCEL to clear the display.
You coudl se this manual: Service_Manual_PDF
Hope this helps.
660 views
Usually answered in minutes!
×