How do I program a new remote for robo swing r900? Where can I find the dip switch settings in the operator?

SOURCE: i have an elite robo swing r900 gate opener. gate

first check you battery and make sure it is putting out 12v dc then if you have a solar power system check the red and black wire comming from the panel and make sure it is putting out 24volts. if you panel is not putting out the volts it caused your battery to die so replace your panel and battery and all should work fine. if your using a trickel charger do the same check power its putting out and make sure its correct and also check the 120v ac comming in to the charger. Follow the steps it deffinatly sounds like a power issue.

SOURCE: How to set dip switches on remote for Chamberlain Liftmaster 1000

I would go with a chamberlain clicker on this issue. These remote are phased out and the 9 dips don't work well with them. Thanks BB