You will have to get a technican to come in and look at your machine ....
below is the description of the error code
481 D Transfer belt mark detection error
• The main motor is operating; and
the lock signal is detected. ? The
belt mark sensor signal does not
change for 120 milliseconds.
possible causes
• Defective main motor
• Image transfer belt out of position
• Belt mark blurred or absent
176 views
Usually answered in minutes!
this is a problem with the transfer belt or main motor. to fully debug and fix this problem a technican will have to look at the machine
see the description of the error code below
481 D Transfer belt mark detection error
? The main motor is operating; and
the lock signal is detected. → The
belt mark sensor signal does not
change for 120 milliseconds.
Possible causes
? Defective main motor
? Image transfer belt out of position
? Belt mark blurred or absent
×