Questions & Answers for: Nitro 482 Computers & Internet

I have a Nitro BMW-483 AMP and it comes on but the led will not light up red nor green and I have checked all the wires. Could someone please help me with my tech problem? if you still get sound it ...

red protection light blinks red then becomes colorless just was working yesterday check you speakers and the wiring; to be sure disconnect speaker from amp and test them if they are working

why does the amp sound like it doesnt have enough why does the amp sound like it doesnt get enough power at times check battery voltage under load with radio off and then on

the red light is on how do i reset it first disconect rca then check power remote or ground disconect speakers if the red light doesnt turn green send your amp to guarantee

everythings hooked up but no sound is comming everythings hooked up but now sound is comming out, everything is as it should be what else is there to do to make it work? have it repaired as previously

amp keeps blowing fuses. i hook it up just to see if it worked and i already went through 10 fuses. any help? it needs repaired, it has an internal short

nitro 482 2 channel amp.....what size fuse goes in the fuse holder on the amp http://www.youtube.com/watch?v=B9BJEPPans4&feature=player_detailpage

nitro bmwz 482 rca problem Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty

no power to monitor check your remote turn on wire that goes between your neg. post and pos. post good should be a 12v wire that hooks to cd player for a turn on and off applcation if you wire direct ...

wiring diagram nitro bmw 482,i just need installation wiring diagram Request the diagram from Nitro.