Questions & Answers for: Hitachi bent screen Computers & Internet

Question about 43FDX01B TV

1 Answer

...screen it has a blue wave that shadows everything in the general area. i have went through the advanced setup where you hold the convayence and input on the remote and when you hit the pip all the ...

Ad

...screen cause the most problems. Wavy lines that get better/worse/change when cable is moved behind TV set. It's a hand-me-down set, and I could even cope with the long warm-up, but the colors and ...

Ad

Question about 65S500 65" HDTV-Ready Rear Projection Television

1 Answer

...SCREEN AND TRIED TO CLEAN IT BUT WITH NO SUCESS. CAN YOU SUGGEST SOMETHING TO CLEAN THE BACK TWO SCREENS?? THANKS there are two screens..the lenticular..and the fresnal...you can try to pull them ...

Question about CP-S225WT Multimedia Projector

1 Answer

image is violet. How do I make adjustments in color? Sounds like the pins on the computer cable are bent...there are three pins that carry Red Green Blue parts of the picture . if one is missing, bent

Question about 53FDX20B 53" Rear Projection Television

1 Answer

...bent I know this set very well, have fixed hundreds of Hitachi sets with convergence problems-- first--did you just go into the customer menu? There are two ways to get into the tech convergence mode ...

...screen.Try to adjust convergance, blue aligned perfect but the red didn't possible fuse. if the red is curved or bent, if the red is straight try covering tv with blanket so the sensors get a good ...

Question about 50FX20B 50" Rear Projection Television

1 Answer

...bent because it causes the blue color to be out of alignment in a curved fashion across the screen the tv worked fine last night & this am it was all messed up I tried to realign but that did ...

Question about CP-X328 Multimedia Projector

1 Answer

...bent. Next, check the cables themselves. I do this by flexing the cable back and forth, starting at one end and working my way to the other. Go slowly and make sure to do this every few inches. If ...

Question about 53FDX01B 53" Rear Projection Television

1 Answer

...bent [not striaght]. I assume this is a projection problem but am wondering if it can be repairs easy (inexpensive) Projection TV sets have two very common problems. One is convergence ( 3D/Warped ...

...screen. nearly impossible to watch The set uses a lamp (model indicated) for the light source--usually a 2000 hour life if OEM and may be getting ready to fail.Its a gamble but you would have to ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...