...boot device order to floppy, CD/DVD and Hard Disk Worldvet You need to check that your media like CD-ROM is in a proper jumper settings because it not being detected by your pc check this link ...
...computer set to network boot. You can disable it in the bios or change the boot order to put network after hard drive. Press probably Delete when booting to get into your bios and look for Boot
...boot-order", so that the SATA drive is the first to boot. Boot it -- it should boot "normally". Shutdown correctly. Turn the computer off. Reconnect the power to the IDE device. Turn the computer on. ...
...boot order is set that way. Otherwise you need to set the first boot order to the CD-ROM from BIOS. When the system boots to the CD-ROM you will be asked to press any key to boot from the CD-ROM, do ...
boot order I'm not able to select a boot order of 1, cd rom 2, usb 3, orther hard drive. Hi. That is the correct place in the BIOS. You have to move USB below Hard Drive to prevent booting
boot order? you will want to enter the bios at the pre boot screen and than simply go to boot order and rearrange it should tell you to push f1 or another function button to enter bios hope this helps
...power supply is OK. Simply check the boot order in the bios settings. if ok, then boot from a bootable cd. if not, correct the booting order making sure that the hard drive drive c: is2nd after
...or f10 to select system setup then select boot setting 'boot order' in boot order your cd rom should be 1st. Press escape and select save change option. Now put your window cd and and see the
...boot order and which key it says you can select to go into the Bios or Setup. Boot the system the go into the BIOS or Setup. Go to the tab that allows you to select your boot order. ...
Usually answered in minutes!
1,358 Questions
703 Questions
590 Questions
517 Questions
494 Questions
