Questions & Answers for: Maax error 521 Computers & Internet

...don't light up. The tub will circulate and heat the water, but the jets don't work. It flashed an error code E01 and also something like SP6?THANK YOU! well first of all i have to assume that this ...

Maax bathtub Palace model Error code C01 jets don't turn on. I have a Maax bathtub Palace model and the jets will not turn on. Error code C01 is displayed. Any ideas or help with error codes? first of

E06 error--how do you get rid of flashing this error and what causes it in the first place. Thanks Finally resolved this on our own tub. We had C01 and E06 error alternating. After gaining access to ...

E-01 error code What system is this on? Do you know the control box number under the bathtub? Rod US Parts Center We locate the "seemingly" impossible... 888-521-6183

I have a maax hydromax tub and the temp. control needs replaced where can i buy one Not as easily done as you would expect. What is the Model number of the Control Box under the bathtub? We need to ...

tub goeson then turns off tub has power goes on then turns right off This sounds like a bad motor. It sounds as if it is overheating. You will need the model number and brand of pump in order to find ...

Lights in maax whirlpool don't turn on check the power coming out of the transformer going to the lights. rod us parts center 888-521-6183

Lights in maax whirlpool will not go on Check the power coming out of the transformer for the light. It may be that the transformer is not working and check the obvious to make sure it is not a lamp ...

Control Panel How do you remove the control panel on the top of the tub, to access the wiring harness? Most topside panels are just stuck on the top of the tub with a double sided tape. Sometimes it ...