Question about C5100n Laser Printer
...a gray rubber strip. That strip had come loose in the center and bowed out, preventing paper from exiting the paper drawer. I manually removed the strip, clipped off a little piece from one end so ...
...COVER EXIT JAM). KINDLY ASSIST ME IN GETTING RID OF THIS PROBLEM. Open the printer, pull out the drum kit, place the drum kit in a dark place, use a vacuum cleaner and a brush and wipeout all dusk, ...
...have an exit jam and to open upper cover and remove. THERE IS NO JAM!! Open that cover look for the sensor it could be a dirty sensor or the spring came loose that flips the sensor back into
cover exit jam Feed Jam or Exit Jam 1. Remove the tray and clear any misfed sheets as given above. 2. Open the top cover. WARNING! The fuser area will be hot. This area is clearly marked. Do not touch
Question about B4350 Laser Printer
...exit rollers not pulling the paper out of the fuser. Look into the top cover above the fuser and you will see two black plastic rollers held by flat metal springs. If they are not touching the rubber ...
Usually answered in minutes!
1 Questions
2 Questions
2 Questions
1 Questions
