Questions & Answers for: Scheu flame pic Computers & Internet

...or a hot surface. The hot surface igniter is very fragile. A small bump may break the elements. Flame is detected by a photocell, signal is sent to the lockout relay board. Change the igniter ...

...at all - just a photocell that has gone bad or has a wasp nest built betweem the eye and the flame (check this first). If the photocell can't see the flame it will shut the heater down. That's ...

lite when i relese the pilot button thermocouple may be bad, are you holding for 45 seconds. is the flame touching the thermocouple if all are true thermocouple is bad

flame in place. Clean the end of the thermocouple connect by scraping off just a little metal from the end just about there the nut tightens the thermocouple into the gas valve. After you have exposed

..."Bin heater" because of it's resemblance to the shape of a dust bin or trash can. This heater has a flame failure valve, also known as a safety valve or relay valve, but it may be a coincidence that ...