Question about Kaba Ilco Unican 1000 keyless lock
...lock from my door but I can't see how to get the handle off. any suggestions? I had the same problem and found the manual here: ...
...lock that the handle was broken from. There is a hole directly under the handle that one would suppose you could insert a pin, depress a button of sorts to release the handle. I've attempted to turn ...
...lock handles are loose there seems to be a lot of play in the handles If the handle has been forced their is a part inside that is broken and it appears as if the handle is loose. I have priced the ...
...handle off to remove the lock assembly? use the other side of the spanner wrench with the point and insert it into the hole in the inside sleeve and you will feel some spring tension.........push in ...
...lock that I have won't open from one side of the gate. The master key and correct code will turn the handle, but the latch doesn't engage. The latch will open from the other side handle. Can you tell ...
...lock to bits to get it off an old door you have to take the handle off the ''1000'' so people dont usually put it back on properly giving the appearance that its broken to fix it back on when the ...
Lock has a Best core in the outside handle but door cannot be locked I recommend that you contact Kaba Ilco directly for technical ...
...lock to suit cant get the handles off now as the collar coves the hole have tried to drill hole to access the pin but still cant get handles off is there another way of getting the handles apart? Try ...
Question about Kaba Ilco Unican 1011 keyless lock without key override
...the screws on the back cover but not sure how to remove the handles? Look for a small hole in the side of the spindle, close to the lock. Poke a stiff wire into the hole to release the inside
Usually answered in minutes!
160 Questions
40 Questions
