Questions & Answers for: insert pause Cars & Trucks

...insert one end into the diagnostic test pin and one in the system ground pin (terminals A & B). Then put the key in the ignition and turn it to the on position but DO NOT start the engine. You will ...

Ad

insert your key in the ignition. (do not turn) Look at the dask and watch the area where the "check Engine" light comes on.. turn the key on-off-on-off-on (semi quickly) do not start the engine. leave

Ad

keeps saying wrong media. when it starts it pauses It plays a certain type of media only. such as WMA format only. You may have inserted a disc with the wrong format. Verify the type of format it is ...

1999 Chrysler Cirrus CD player displays "Paused" when I insert a CD. Pressing the Pause/Play button does nothing. Any suggestions? the eye probably cant read the disc get the claening cd

insert the paper into BOTH holes in the plug in. you are essentialy going to complete the circuit. with the paper clip inserted, turn your keyall of the way on (DO NOT START THE CAR. IT MAY DAMAGE THE

Question about 1994 Accord

1 Answer

...them to verify that it is the correct radio for you vin. You only get three attempts to insert code. Disconnect battery, wait 20 minutes, then apply code. Push buttons fully and pause. Hope this ...

Question about 1990 Regal

1 Answer

...pause....) Each code will flash 3 times before moving onto the next code. Get the codes and respond back here and I can try to help further. Also let me know what this "Blown" plug looked like. (I do ...

...insert the key in to the ignition turn the ignition to on then off then on again then if again and then on do not crank the engine do this within seconds and then look for the check engine light to ...

...a metal paper clip works well, and short between terminals A and B on the ALDL plug. after you insert your jumper turn the key to the "ON" position and your check engine light will flash a

Question about 1989 Camry

1 Answer

Insert a jumper wire or paperclip between ports T1 and E1 in the diagnostic connector located underhood. ONLY those 2 ports. When inserted with key on, the check engine light should begin flashing. If

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...