Problems with Oki Printer and Toner Sensing I have the above printer and it called for toner, inserted the toner, and it saying that the ID Unit is not installed and Toner Sensor Error. Cannot find ...
...that no toner is
...insert the toner cartridge into the image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is not fully closed (locked), a "toner ...
...toner cartridge has a small window from outside where the dark blue handle. You should turn a photodrum gear wheel while the window will not open. After that insert a drum unit and work. If you have ...
...Also, while I hate to state the obvious, make sure you removed the tape from the new toner before inserting it. Last, make sure you lock the toner in place with the blue lever. And it never hurts
...unit, or the ones inside the printer, get dirty and have poor electrical contact, giving this kind of message. Try to reseat the toner cartridge in the drum, clean the contacts and re-insert the
...insert the toner cartridge into the image drum, and make sure the blue lever is pushed ALL THE WAY toward the back of the printer (fully locked position). If it is not fully closed (locked), a "toner ...
...removing the cartridge, and gently "rolling" it (not SHAKING it) from side-to-side, and then re-inserting it, will temporarily
612: C Toner missing The toner cartridge might not properly installed. Just try reinstalling or re-insert problematic toner cartridge, after doing it the error should gone.
...Magenta drum and toner and it is still saying that I need to add magenta toner. I don't know what is wrong. power down the printer for 30 minutes. remove and then insert the magenta toner. power
Usually answered in minutes!
1 Questions
2 Questions
2 Questions
1 Questions
