Questions & Answers for: Intermatic install clock spring Home

clock POOL FIX ON EBAY TO INSTALL THIS MOTOR REMOVE SCREW ON LEFT AND JUST BACK SCREW ON RIGHT A FEW TURNS, TIMER WILL ROCK UP OUT OF BASE THIS WAY . UN-HOOK WIRES ONE AT A TIME AND INSTALL WIRES FROM

...install a new one? Chris chris@cyoungfinancial.com 707-546-4910 You can replace the clock motor for $16 ... ...

spring located top of box Tip out timer mechanism and look at gears for rust and dirt Does it look like the timer is too rusty for the trippers to click the on-off lever? Look at the back of timer for

...install instruction. Clock is on back of mechanism. Mechanism snaps out with thumb spring located at top inside the box. Add a comment for more free help. Also take advantage of fixya phone service. ...

...install clock motor, snap mechanism out of box using thumb spring at top. Motor is attached with 2 small star screws. Notice that motor has plastic gears so motor is designed to stop working before ...

...clock motor and install yourself using star-screwdriver. Mechanism snaps out using thumb spring, timer is on back of mechanism ...

...spring located top inside box. Buy clock motor and extra trippers from Granger: http://www.grainger.com/Grainger/timer-accessories/timers/electrical/ecatalog/N-8hi ...

...clock dial. Trippers come into contact with on-off lever, and trippers push lever. On tripper pushes lever one direction. Off tripper pushes same lever other direction. Each time the lever moves back ...

...clock motor and trippers.OR. You can buy the T104M mechanism-only, and snap into existing enclosure.OR. It may be cheaper: Buy the whole T104 and snap out of new enclosure and install mechanism into ...

...clock does not have enough force to win the spring tension of the switch in side. This Timer is new, installed last week, never work as it should since then. spring wore out not enough tension ...