Questions & Answers for: Whirlpool p5 code Computers & Internet

Question about WTW6600SW Top Load

1 Answer

...P5 connector on and off the RPS a dozen times to clear any corrosion to no avail. Any idea what is wrong? The F50 error code indicates that the RPS (rotor position sensor) detects no motor rotation. ...

Ad

P5 machine/motor control connector and the drive motor connector. If there is continuity, replace the drive motor. If there is no continuity, replace the lower machine harness. 11. The drive motor and

Ad

Question about WTW6400SW Cabrio Washer

1 Answer

Code Error F50 Whirlpool Cabrio WTW6600SW F then 50 flashes when the motor rotor position sensor (RPS) senses no rotation. Does basket turn freely? If not, make sure bottom shipping pack has been ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

code I have replaced the RPS ASSEMBLY and harness but still get these fault codes and no spin. In manual test modes the lid swith test was good, the rps test was good, ie the indicator lights operated

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

code during the washing cycle and does not clear. Hi F51 error is a rotor position sensor error. This is a hardware error either due to a faulty rotor position sensor or due to a faulty control board.

Question about WTW6400SW Cabrio Washer

1 Answer

code. Could you please explain what my problem may be? If I don't hear from you soon I will call the 800 number. I have a lot of laundry to do today. Thank You, Renee Rowe Hi Thanks for using FixYa. F

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...code. If the basket spins freely, you could have a wiring failure that would prevent the motor from spinning. Motor Circuit This test checks the wiring to the motor and rotor position sensor; and the ...

Question about WTW6200S Top Load Washer

1 Answer

...code on Whirlpoos Cabrio wash machine. Tub spins, nothing under agitator, replaced control board, nows blows breaker. F then 50 flashes when the motor rotor position sensor (RPS) senses no rotation. ...

Question about Cabrio WTW6600SBT Top Load Washer

1 Answer

...code says the part on the motor called the rotor position sensor has failed this is the test procude that must be performed to see if it or another part is bad (as taken directly from the cabrio ...

Question about Cabrio WTW6600SBT Top Load Washer

2 Answers

...code indicates that the motor module is overheating and is set when the machine/motor control detects high temperature for the motor module. Does basket turn freely? If not, determine cause of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...