very goo site k You probably have a physical problem, most likely: - Broken CPU fan bracket --> the plastic piece that holds the CPU fan in place can dry out and break down. Check if CPU fan is loose.
Question about Socket 478 CPU COLLING FAN & HEAT SINK up to 3.2GHz
...overheating. I would like to remove, clean and put back the Sanyo Denki fan. I an open the two plastic clips on the top of the fan bracket, but i do not know how to proceed. Simply open/unlock ...
how to take out a Retention bracket on a 478 mobo If this is the plastic type, turn over the motherboard and you will see 4 pushpins (white) Use a cocktail stick to poke them through the hole Once ...
Question about CELERON 2.66Ghz CPU AND MOTHER BOARD (CPU4266CEL) Motherboard
...paste applied. Also wipe the bottom of the new Heatsink off with alcohol before using. Clean with a plastic scraper first, then follow with alcohol. I use an old credit card. Isopropyl Alcohol ...
Usually answered in minutes!
350 Questions
260 Questions
250 Questions
168 Questions
217 Questions