Questions & Answers for: pluging Music

how to anyone know how to bypass the footswitch to go straight from clean to metal with 1 click and bypass the crunch Yes unplug your foot switch, it will work fine with out a stomp box pluged in. ...

110v is pluged to 220v. What part of the organ damage? This totally depends on what organ you have. Many would blow the input fuse. Some organs have a wide range power supply that would use either 110

pluged in but no sound comes out whats up? pluged in but no sound comes out, whats up? Could be that the male plug isn't connecting in its recepticle, or perhaps an internal wire or other connection ...

very loud ground hum when turned on If nothing is pluged into the speaker and it makes that noise. It is not a ground problem. You either have a blown amp or remotely some bad connection at the large ...

i have a behringer djm 750 mixer and i hve 2 turntables one pluged into channel 2 the other pluged into channel 4. i have assign a to channel 2 and assign b to channel 4 on the crossfader side A will ...

how do you wire to amps do i need to loop?and what pluges into amps If switching between 2 amps, plug guitar into pedal in and the a/b outs go to the inputs of the amp A and amp B.

yamaha clavinova i plug it in and the light comes on but when i press the keys no sound comes out. If any jacks are connected to the output , unpluged it. And be shure that device pluged its own ...

roland pad 80 is it normal for the lcd display to show a bar of squares and nothing else when pluged in to power and not pluged into anything else? The Roland Pad 80 has a contrast control, if it's ...

flishing light on center of my Ovation OP20 and it not pluged into any thing wa working but stoped , new batt in it ?? USUALLY MEAN BATTERY REQUIRED. CHECK YOU HAVE IT ROUND CORRECT WAY ALSO IF JUST ...

blues deville when pluging into pwr. amp. in. the audio goes thru the reverb. When you connect your input directly through the power amp input there is no volume control in the signal route. Only ...