Questions & Answers for: Elna pull factor Computers & Internet

...the round assembly that is about 1/2 inch in diameter with a screw in the center of it.) Pull the thread in the front and wrap it to the back and continue towards the bobbin winder on the ...

...Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working ...

...across the full width of the bobbin. When full, pop bobbin winder back to left, cut thread and pull off the bobbin. Then place the bobbin into the bobbin holder with the holes on top, and pull ...

Cant make the auto threader work on an elna 2007 Do you mean the auto needle threader? Mine won't work on very small needle sizes so I resort to the old manual needle threader for these. Ditto for ...

counter-clockwise, hold the end of the thread in your left hand, drop the bobbin into the case, and pull the thread into the slot at the front of the bobbin case by pulling it up and around the bobbin

Having thread breakage probelm and also can't track down the correct bobbin to use on the Elna 2005 have you got the manual for this machine? You can download one from here: ...

My foot dog will not pull the fabric as I sew? I'm having to pull it manually myself .. Anyone know how to fix this problem? My foot dog will not pull the fabric as I sew? I'm having to ...

Why does fabric get caugh on the roll hem devise when over locking this sounds like an overlocker/serger machine you are using? if the fabric is catching on the overlocking tongue it could be a number

...do I get my Elna 7000 to sew as when I thread the needle and start sewing - the thread is somehow pulled out of the needle? Have threaded needle and out bobbin in checked tension etc. when plain ...

...6003 sewing machine Loosen the upper tension as far as it will go. RAISE the presser foot. Then pull a piece of unwaxed dental floss DOWN through the tension disk (NEVER pull up). Hopefully, that ...