...it. Is this a BIOS problem it has two gigs of ram and is the 3.0 GHz processor model. I would first remove some RAM to see if the problem persists. It's an easy beginning to get your problem
Boots, no video signal. I attempted to upgrade my system RAM from 1gb to 2gb. In doing so, I caught a hint of a whiff of smoke/something acrid. Now, the machine boots, but the monitor is not getting a
Booting problem I've asus M2N-VMX mother board . In my m/b I didn't get signal for moniter & keyboard , Its not booting(no beep sound), wt can I do for it? try these two alternatives: 1.try to clean ...
processor. Any other ideas? have you also tried different video cards? or the onboard built into your motherboard? Your CPU might be overheating, and the system is shutting down. I just went thru this
Question about M7VIG-400 (M7VIG 400-COMBO4) Motherboard
POST process. Is the processor fried or what is going on? Before you "fry it" try taking the CPU fan off of the processor, remove the processor, reinsert the processor and CPU fan and see what happens
Question about MCP6P-M2 Motherboard - v6.0, NVIDIA GeForce 6150, Socket AM2, MicroATX, Audio, Video, 10/100
...remove the processor heatsink and re -install it properly( your heatsink is probably not seated properly in processor). or check if your video card fan is working. and please install additional ...
Hello I have a problem, my motherboard g31-m7 no video, i picked up the battery, but the problem still there, how to solve this problem? I don't know who recommended a CMOS battery to fix your ...
...remove unwanted programs. After this all steps your system is slow then you have to change your Processor or replace the mother board this will surely improve your system's speed Hope the above ...
Question about MCP6P-M2 Motherboard - v6.0, NVIDIA GeForce 6150, Socket AM2, MicroATX, Audio, Video, 10/100
my pc beep everytime i power the processor. your RAM slot may be bit loose. Remove RAM from slot and try another slot.
Question about MCP6P-M2 Motherboard - v6.0, NVIDIA GeForce 6150, Socket AM2, MicroATX, Audio, Video, 10/100
...the drivers for the graphic card and after rebooting, the system wouldn't come on. I removed the CMOS battery, CMOS jumper and reseated the processor and still nothing, I them removed ...
Usually answered in minutes!
122 Questions
91 Questions
72 Questions
69 Questions