Questions & Answers for: Tristar remove shell Computers & Internet

screw top not coming off I have tristar steam buggy ( yellow) and used it lots over a few days. The last time i used it i could not get the screw top off it keeps slipping as if it has melted. Does ...

...had the same problem.At first the top would not come off..Using an adjustable wrench I was able to remove it.After not using it for a few years I was happy this seemed to be my only problem.Then,the ...

Steam buggy water reservoir cap has apparently been cross threaded, and cannot be removed by twisting or other "encouragement." If I cut it off, where can I get a replacement? Can the machine be used ...

...head screws holding the two halves of the cleaner together, and the rubber bumper. You have to remove the screws first. Your model may have more or less screws. On mine, there are two screws

Is there a trigger handle to turn off and on no betty, stupid bit of kit imo, no operating switch, just on/off at the switch, which heats the water up. i measured 500ml of water heated using my kettle

shell are 1" Torx...you don't have to remove them, but it's handy to know that all the screws on the outer shell are interchangeable, except the 3 that hold the shell together. In addition, there is a

...vacuuming and we have to wait for it to cool down it may cut out6-7 times when doing our cleaning. remove the filter and remove the plastic casing on the filter or check for hair and dust at the ...

How do I access the motor and replace the brushes on compact tristar vacuum cleaner? I removed the front screw located on the bottom in the front of the canister. I have the bag removed and can view ...