shell and check for any jammed object or broken pieces that might cause the door jamming. if it is a matter of a stuck object that somehow got there, you can remove it and hope for the best. otherwize
...remove the shell off the microwave to get at it. This one operates with a inverter..you have some high voltage there. Make sure it's unplugged. While you have it apart, check the primary switch, top ...
...ordered a replacement part, but my problem is this I can't figure out how to open the case. I have removed all the visible screws and the bottom portion of the case opens, but seems to be stuck on
...shell. Remove at least 2 screws each side and 2-5 rear screws securing the top. Nothing like peering inside to see what is causing the VCR to get stuck and help remove it. No release pinhole or tape ...
Question about PVD4744 DVD Player/VCR
...remove the outer shell. After you have the cover off you will be able to see the reader head. Using Q-tips and rubbing alcohol wipe the surface clean and wipe lightly. You should be able to see a bit ...
...located inline. You have to remove the outer shell of the microwave to access this area. Also do not touch both sides of the fuse terminal at any one time due to a nasty shock from the capacitor ...
How do you change the bulb You may have a bulb on the right side ,if correct then remove the clock panel and access it from there.If not remove the shell and lift off the microwave cover to get to ...
...remove the screws.# 3 Lift the outer shell off the microwave chassis and locate the box that houses the halogen lightbulb. In most cases, the box is metal. It may or may not have a lid on it. If it ...
Question about Lumix DMC FZ47 also known as FZ48 Digital Cameras
is attached to the body. Is ist possible to remove it ? If the ring is firmly attached to the body, chances are you will end up cracking the body of the camera destroying the shell in the process
...remove the connectors, look for any latches on the sides before pulling. Apply removal force on the connector shell; do not yank on the wires! Sometimes the connector shells become brittle with ...
Usually answered in minutes!
1 Questions
